null

Janna Crystal Dust Glass Non Electric Easy Fit Pendant Light

Dar Lighting - JAN652

RRP: £98.40
Our Price: £63.96
(You save £34.44 )
Description
The JANNA easy-fit pendant in glass is covered on the inside with thousands of tiny crystals; this easy fit pendant gently glistens when switched off and really sparkles when on. With a hole to suit an E27 fitting, and an adapter supplier to work with B22 fittings, simply fit to your existing suspension. Shown with our SP65 suspension (sold separately).

Stock Levels

We currently have 34 available, see below for further information.

Bulb Included: No
Further Information

Dar Lighting have these available in thier warehouse, please allow 2-5 days for despatch. For accurate shipping time after despatch please check our Shipping Policy page for further information.

Technical Data

Weight:
2.59 KGS
Width:
25.00 (cm)
Height:
22.50 (cm)
Depth:
25.00 (cm)
Product Height:
225
Product Diameter:
250
Product Weight:
2.589
Lamp Holder Type:
to fit E27 (non elec) + Reducer
Number Of Lamps:
1
Max Wattage:
60
Bulb Type:
GLS
Bulb Included:
No
IP Rating:
20

Information

A key factor is choosing the right light fitting takes in many different aspects, but one that we would rank high up the priority list is the physical size of the product. When considering product size, one of the most important features is the height, or drop, of a fitting. Sometimes this can be variable, but we will always give the Minimum and Maximum drop of a fitting within the technical data. We advise that you check against your own ceiling height and measure the distance from the floor to the bottom of the fitting as given in the technical data, if you are happy this will work for you then proceed with the purchase. If you are in any doubt with this please get in touch and we can try and help you out as needed.

Within the Technical Data are of all our products we have tried to give you as much information as possible. We will show details on the lamp holders and number of lamps the fixture can take, certain fixtures will NOT be supplied with the relevant lamps, this information should also be clearly stated. If the fixture as a fixed LED element we will give you the details on colour temperature, wattage and we will clearly state if the fitting is Dimmable or Not, please check this and if you require any sort of clarification or help with this, feel free to get in touch.

We will also state the IP Rating of a fitting, normally referred to as Ingress Protection. As a rule of thumb there is no requirement of a high IP rating for fixtures that have no chance of being in contact with water, most fittings for general areas will be IP20. It will come in to play more on other areas like Bathrooms and External Lighting, where contact with water is much more likely, for these areas we would recommend a rating of IP40 as a minimum. For more details on this please refer to our Blog post explaining IP ratings and how they are made up and graded.