Antler 8 Light Emperor Pendant Light

David Hunt - ANT0829E

RRP: £1,560.00
Our Price: £1,322.03
(You save £237.97 )
Antler Emperor 8 Light Pendant

Stock Levels

All David Hunt products are handmade to order in the UK, and usually carry a 4 to 6 week lead time depending on the product. Please see below for further information on this.

Bulb Included: No
  • No Additional Tariffs/Charges for Delivery to Ireland.
  • Checkout our Shipping Policy Page for more Shipping information.
Further Information

As this item is made to order it will generally carry a 4 to 6 week lead time, but may be available earlier than that. David Hunt will be able to give us an accurate lead time for manufacturing. To get a confirmed delivery time please click here and fill in our stock check email with any specific colours or bespoke designs you would like this fitting to have, or click on our Chat icon in the bottom of the screen to speak to a member of our sales team. Please check our Shipping Policy page for further information about delivery times to your area when stock is available.

Please also note, as this is a made to order product, and tailored specifically to your liking, we cannot accept any returns on fittings from the David Hunt range. We will endeavour to meet all your expectations as best we can, and will be in contact with you the entire way through the design process, providing samples and finishes where necessary, but once ordered and supplied we will not be able to accept any. returns on this product.

Technical Data

17.00 KGS
Product Height:
Product Width:
Product Diameter:
Product Max Height:
Product Min Height:
Product Weight:
Lamp Holder Type:
E14 (SES)
Number of Lamps:
Max Wattage:
Bulb Type:
Bulb Included:
Product Class:
1 - Earthed
IP Rating:
David Hunt


A key factor is choosing the right light fitting takes in many different aspects, but one that we would rank high up the priority list is the physical size of the product. When considering product size, one of the most important features is the height, or drop, of a fitting. Sometimes this can be variable, but we will always give the Minimum and Maximum drop of a fitting within the technical data. We advise that you check against your own ceiling height and measure the distance from the floor to the bottom of the fitting as given in the technical data, if you are happy this will work for you then proceed with the purchase. If you are in any doubt with this please get in touch and we can try and help you out as needed.

Within the Technical Data are of all our products we have tried to give you as much information as possible. We will show details on the lamp holders and number of lamps the fixture can take, certain fixtures will NOT be supplied with the relevant lamps, this information should also be clearly stated. If the fixture as a fixed LED element we will give you the details on colour temperature, wattage and we will clearly state if the fitting is Dimmable or Not, please check this and if you require any sort of clarification or help with this, feel free to get in touch.

We will also state the IP Rating of a fitting, normally referred to as Ingress Protection. As a rule of thumb there is no requirement of a high IP rating for fixtures that have no chance of being in contact with water, most fittings for general areas will be IP20. It will come in to play more on other areas like Bathrooms and External Lighting, where contact with water is much more likely, for these areas we would recommend a rating of IP40 as a minimum. For more details on this please refer to our Blog post explaining IP ratings and how they are made up and graded.