null

Mylie Satin Chrome LED Bedside Reading Wall Light

Dar Lighting - MYL7146

RRP: £126.00
Our Price: £81.90
(You save £44.10 )
Description
Mylie LED Wall Light Satin Chrome MYL7146 LED fully directional surface mounted wall light satin chrome push button switch

Stock Levels

We currently have 120 available, see below for further information.

Bulb Included: Yes
Further Information

Dar Lighting have these available in thier warehouse, please allow 2-5 days for despatch. For accurate shipping time after despatch please check our Shipping Policy page for further information.

Technical Data

Weight:
0.58 KGS
Width:
7.00 (cm)
Height:
20.00 (cm)
Depth:
15.00 (cm)
Product Height:
200
Product Width:
70
Product Depth:
150
Product Diameter:
0
Product Max Height:
0
Product Min Height:
0
Product Weight:
0.581
Lamp Holder Type:
LED
Number Of Lamps:
1
Max Wattage:
3
Lumen Output:
143
Colour Temperature:
3000
Bulb Type:
LED
Bulb Included:
Yes
Product Class:
2 - Double Insulated
IP Rating:
20
Manufacturer:
Dar Lighting 1
Part Code:
MYL7146
Universal Product Code:
5035128559296
Availability:
120

Information

A key factor is choosing the right light fitting takes in many different aspects, but one that we would rank high up the priority list is the physical size of the product. When considering product size, one of the most important features is the height, or drop, of a fitting. Sometimes this can be variable, but we will always give the Minimum and Maximum drop of a fitting within the technical data. We advise that you check against your own ceiling height and measure the distance from the floor to the bottom of the fitting as given in the technical data, if you are happy this will work for you then proceed with the purchase. If you are in any doubt with this please get in touch and we can try and help you out as needed.

Within the Technical Data are of all our products we have tried to give you as much information as possible. We will show details on the lamp holders and number of lamps the fixture can take, certain fixtures will NOT be supplied with the relevant lamps, this information should also be clearly stated. If the fixture as a fixed LED element we will give you the details on colour temperature, wattage and we will clearly state if the fitting is Dimmable or Not, please check this and if you require any sort of clarification or help with this, feel free to get in touch.

We will also state the IP Rating of a fitting, normally referred to as Ingress Protection. As a rule of thumb there is no requirement of a high IP rating for fixtures that have no chance of being in contact with water, most fittings for general areas will be IP20. It will come in to play more on other areas like Bathrooms and External Lighting, where contact with water is much more likely, for these areas we would recommend a rating of IP40 as a minimum. For more details on this please refer to our Blog post explaining IP ratings and how they are made up and graded.